|
Olympic
Rotary Joint
For Hydraulic,
Coolant, Air
|
|
- Stainless
Steel
- Single Passage
- 1/8"
to 1 1/2 " Ports
- Speeds to
3600 RPM
|
|
Series
200 Rotary Joint
For Steam, Hot
Water, Hot Oil, Condensate, or Other Fluids
|
|
- Bronze and
Steel
- 1 Passage
and 2 Passages
- Sizes: 1/2"
to 2"
- Speeds to
1500 RPM
- Self Supported
from Rotor
|
|
Series
300 Rotary Joint
For Steam, Hot
Water, Hot Oil, Condensate, or Other Fluids
|
 |
- Nickel Plated
or Stainless Steel
- 1 Passage
and 2 Passages
- Sizes: 3"
to 8"
- Speeds to
1500 RPM
- Mounted to
Bearing Block or
Pedestal
|
|
Series
400 Rotary Joint
For Steam, Hot
Oil,Condensate, or Other Fluids
|
|
- Nickel-plated
steel
- 1 Passage
and 2 Passages
- Sizes: 1"
to 2-1/2"
- Speeds to
400 RPM
- Self Supported
from rotor
|
|
Series
500 Rotary Joint
For Steam, Hot
Oil,Condensate, or Other Fluids
|
|
- Brass or
Stainless Steel
- Ball Bearings
- 1 Passage
and 2 Passages
- Sizes: 1/4"
to 2"
- Speeds to
3600 RPM
- Self Supported
from Rotor
|
|
Series
600 Around the Shaft Rotary Joint
For Coolants
Such As Water or Oil
|
|
- Stainless
Steel, Brass or Aluminum
- 1 Passage
and 2 Passages
- Sizes: 1"
to 6"
- Speeds: Max
1000 RPM
- To be mounted
on Customer Shaft
- Engineered
to Customer's Requirements
|
Series
700 Timing Valve
Automatic on-off control of air or fluids, often used on rotary tables
to provide control of clamping devices or liquids to a process. |
|
- Aluminum
Body
- One or Two
Circuits
- Up to 8 Circuits
per Circuit
- Timing Plate
Customizes Valve to meet specific operating tasks
|
Series
800 Swivel Joint
For slow turning or oscillating motion, steam hot oil, water, air. |
|
- Nickel plated
body
- Stainless
Steel Rotor
- Teflon Seal
- Pressure:
To 150 PSIG
- Temperature:
To 375 degrees F
|
Series
900 Rotary Joint
For High Pressure, High Speeds, typical applications include hydraulic
collets and gun drills |
|
- Aluminum
Body
- Single or
Multiple Passages
- Pressure:
To 3000 PSIG
- RPM: To 6000
- Tail Shaft
option available for electronic pickups
|
Miniature
Rotary Joint
For the application where miniaturization is important, Rotherm has
developed a special joint to fit tight places. |
|
- Aluminum
or Stainless Steel
- Single Passage
- 1/16 inch
to 1/8 inch
|
Air
Cooled Rotary Joint
For
applications with little to no flow of media running at high speeds,
this joint is designed to dissipate heat with fins. |
|
- Aluminum
Body
- Ball Bearings
- Single Passage
- 1/8 inch
to 1 inch
|
|
Series
2604 Rotary Union
Designed for
Handling Air or Hydraulic Fluids
|
|
- Stainless
Steel or Aluminum
- 1 Passage
and 2 Passages
- Sizes: 1/4",
1/2" to 3/4"
- Low RPM
- Pressure:
3000 psi to 5000 psi
|
|
Series
1888 for Clutches
Fawick and Witchita
clutches
|
|
- Three Passages
- Port Sizes:
1-3/8", 2-1/2"
- Widely used
in lumber mills
|
|
Custom
Designed Rotary Joints
Rotary Joints
specifically designed for your application. (Picture at right is
an example)
|
|
- Sizes up
to 6 inches
- 1-6 Passages
- Special materials
- Speeds to
3600
- Temperature
to 500°F
- Liquid and
Gasses
|
|
Rotary
Joints for Dryers
Used on rotating
Dryers and Calenders in Rubber, Plastics, and Textile machines
|
|
- Sizes up
to 3 inches
- 1 and 2 Passages
- Brass and
Stainless Steel
- Custom Flanges
- Speeds, temperature,
and pressures to meet the application
|
